ORLANDO, FL, USA
N48021
Cessna 170
The pilot was making a wheel landing on runway 25 with the wind from 320 degrees at 5 knots. During the landing, the airplane started to veer to the right. Reportedly, the pilot lost directional control, and the airplane continued to the right. Subsequently, the left main gear collapsed, and the left wing collided with the ground and was damaged. During repair, the left brake master cylinder was determined to be inoperative due to a bad o-ring.
On January 10, 1998, about 1240 eastern standard time, a Cessna 170, N48021, registered to a private owner, operating as a 14 CFR Part 91 personal flight, ground looped on landing at Orlando Executive Airport, Orlando, Florida. Visual meteorological conditions prevailed and no flight plan was filed. The airplane sustained substantial damage. The commercial pilot and two passengers were not injured. The flight originated from Leesburg, Florida, about 20 minutes before the accident. The pilot stated he was making a wheel landing to runway 25. The airplane started to veer to the right on landing rollout. He did not attempt a go-around. He lost directional control. The airplane continued to the right, collapsed the left main landing gear, and the left wing collided with the ground sustaining structural damage. The pilot contacted the NTSB on March 23, 1998. He stated his airplane had been repaired and returned to service. During the repair of the airplane by Aeromasters, it was determined that the left brake master cylinder was inoperative due to a bad o-ring.
failure of the the left brake to operate, due to a bad o-ring; and subsequent failure of the pilot to maintain directional control of the airplane during landing rollout, resulting in a ground loop and subsequent on-ground encounter with terrain.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
