Aviation Accident Summaries

Aviation Accident Summary LAX00LA289

PALO ALTO, CA, USA

Aircraft #1

N79004

Cessna 172K

Aircraft #2

N7271R

Beech 58

Analysis

The pilots of a Beech (Baron) and a Cessna planned to depart using runway 31, and they taxied toward the runway's engine run-up area. Upon arrival, the Baron pilot found the area fully occupied by six other airplanes, so he held short. The Cessna pilot stopped in trail behind the Baron. After a few minutes, an airplane vacated the run-up area, and the Baron pilot applied engine power to reposition his airplane in the run-up area. The Cessna pilot attempted to pass the Baron by proceeding between the Baron's right wing and another airplane, to the Cessna's right side. The Cessna pilot indicated that he misjudged his clearance, and the leading edge of his left wing impacted the rear of the Baron's rotating propeller blades.

Factual Information

On July 15, 2000, about 1100 hours Pacific daylight time, a Cessna 172K, N79004, operated by the Happy Pilots Flying Club, Inc., Santa Clara, California, taxied into a Beech 58, N7271R, operated by its pilot-owner, at the Palo Alto Airport of Santa Clara County, Palo Alto, California. When the collision occurred, the Cessna pilot was attempting to taxi around the stationary Beech, which was holding on a taxiway leading to runway 31. The Cessna's left wing was substantially damaged, and propeller blades on the Beech's right engine sustained minor damage. There were no injuries to the private pilot and passenger in the Cessna, or to the commercial pilot and passenger in the Beech. The flights were being performed under 14 CFR Part 91, and visual meteorological conditions prevailed. Both airplanes' flights were originating at the time of the accident. The Cessna pilot subsequently reported that minutes prior to the collision, he had taxied toward the engine run-up area associated with runway 31 where he observed the standing Beech (Baron). After waiting a few minutes, he decided to attempt to pass the Baron. The Cessna pilot reported that while maintaining clearance from an (unspecified) airplane to his right, he "misjudged" his clearance from the Baron. The leading edge of the Cessna's left wing contacted the rear of the Baron's right engine rotating propeller blades. The Baron pilot subsequently reported that the accident occurred after he had taxied from his tie-down spot and was holding on the centerline of the taxiway leading to the run-up area. He indicated that he was waiting for a place to open in the run-up area because it was full. There were at least six airplanes in the area awaiting clearance for takeoff. The Cessna was behind the Baron. As a place opened in the run-up area, the Baron pilot advanced the throttles to occupy the available spot. Just at that moment, the Cessna attempted to pass the Baron on its right side. The Cessna was moving rapidly. The Cessna's left wing overlapped the Baron's right wing and was lacerated by the Baron's propeller blades.

Probable Cause and Findings

The Cessna pilot's inadequate visual lookout and misjudged distance to a standing Beech while taxiing for takeoff.

 

Source: NTSB Aviation Accident Database

Get all the details on your iPhone or iPad with:

Aviation Accidents App

In-Depth Access to Aviation Accident Reports