Thermal, CA, USA
N562AB
Cessna 172S
The airplane nosed over after veering off the runway and colliding with a cement block during a touch-and-go. The student completed five successful touch-and-goes. On the sixth landing, a quartering wind blew the airplane to the left of the runway. The student tried to takeoff, but the airplane veered off the runway. The nose wheel hit a cement block, and the airplane nosed over. No preimpact mechanical malfunctions or failures were identified.
On March 22, 2005, about 0915 Pacific standard time, a Cessna 172S, N562AB, nosed over after veering off the runway and colliding with a cement block at Thermal, California. Palm Springs Flying Club was operating the airplane under the provisions of 14 CFR Part 91. The student pilot, the sole occupant, was not injured; the airplane sustained substantial damage. The cross-country instructional flight departed Palm Springs, California, about 0800. Visual meteorological conditions prevailed, and no flight plan had been filed. The operator reported that the student pilot flew solo to Thermal to practice touch-and-go takeoffs and landings. The student completed five successful touch-and-goes. On the sixth landing, a quartering wind blew the airplane to the left of the runway. The student tried to takeoff, but the airplane veered off the runway. The nose wheel hit a cement block, and the airplane nosed over. The student exited through the pilot's side door. The student moved out of the area, and did not submit a statement.
the student pilot's inadequate compensation for the crosswind conditions and failure to maintain directional control.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
