Buffalo Grove, IL, USA
N11239
Cessna 150L
The airplane was operated from the destination airport by a company providing airplane instructional and rental services. The airplane was piloted by a certified flight instructor (CFI) with a student pilot, who were returning with other company airplanes and instructors from a cross country flight to a casino. The airplane was on a night visual approach to the destination airport when the CFI executed a forced landing on a small dark area in a residential area following a total loss of engine power. The CFI reported to local law enforcement that the airplane ran out of gas. The CFI stated that he did not lean the mixture for the flight. Examination of the airplane revealed no usable fuel aboard, and the mixture control was in the full rich position. The student pilot stated that during the return flight the power setting was at a full setting at an altitude of 3,500 feet mean sea level. The CFI stated that he began his employment with the operator about one month prior to the accident following a company checkout in a different make and model. The CFI provided flight instruction in the accident airplane make and model upon his hire to student pilots without receiving company training and a checkout in the accident airplane make and model airplane. The CFI received a company checkout in an airplane make and model other than the accident airplane. The CFI stated that which he paid the costs associated with his company training which included airplane rental and company instructors. Following the accident, the CFI did not know under what conditions the airplane's fuel gauges would be accurate and did not know the accident airplane's maximum glide speed. The CFI did not know how to calculate a safe flight time or to make use of a dipstick to accurately determine fuel level as cited in an Federal Aviation Administration Accident Prevention Publication. The airplane engine was 613.7 hours past the engine manufacture's recommend time for a major engine overhaul of 1,800 hours.
On May 7, 2005, at 2300 central daylight time, a Cessna 150L, N11239, operated by The Flight Center Inc., dba Palwaukee-Flyers, impacted terrain during a forced landing approximately 5 miles northwest of Palwaukee Municipal Airport, Wheeling, Illinois. Night visual meteorological conditions prevailed at the time of the accident. The 14 CFR Part 91 flight was not operating on a flight plan. The certified flight instructor (CFI) received serious injuries, and the student pilot received minor injuries. The flight last departed from Baraboo Wisconsin Dells Airport (DLL), Baraboo, Wisconsin, about 2115 and was returning to PWK. The CFI stated he and the student pilot departed PWK about 1700 en route to a casino in Hammond, Indiana, with seven other instructors and their students. One of the instructors was the chief flight instructor who was also a company co-owner. While en route, they changed their destination to DLL due to instrument meteorological conditions at their original destination. The CFI said that the accident airplane would "usually burn" about 6 gallons per hour, and he did not lean the mixture during the flight. He stated that before he left, he "made sure that there was full fuel in the tanks." Upon arrival at DLL, he checked the tanks and saw that they "looked only 1/4 empty and determined there would be enough" fuel for the return to PWK. Prior to departure, the CFI stated the he checked the fuel tanks again after he watched the student pilot perform a preflight inspection of the airplane at DLL. The CFI said that he checked the fuel tanks using a flashlight at night. While at DLL, the CFI said that he reportedly asked the chief flight instructor about the fuel level in each tank, and the chief flight instructor responded by saying it was okay. The CFI did not use a dipstick to check fuel tanks at either location. The CFI stated they departed DLL about 2130 and the weather was "very good and everything was going fine." The engine started to sputter and lost power about two miles from PWK. He stated that he "immediately" started to perform his engine failure checklist but could not restart the engine and declared a Mayday. He stated that his altitude was about 2,200 feet mean sea level (MSL), and he knew that he didn't have much time. He saw nothing but houses and buildings except for a small dark area that looked empty where he attempted a landing on. The area was very small and the airplane impacted between several houses and a water facility. According to the Buffalo Grove Police Department Incident Report, the CFI said, "the plane had run out of gas." The student pilot stated that they returned to PWK with full power at an altitude of 3,500 MSL. He stated that there was a "noticeable" headwind and "good" visibility. Approximately 10 miles from PWK they began a decent to 2,500 feet MSL and upon reaching that altitude the engine "abruptly" began shaking and there was a "noticeable" lack of power. The CFI began employment at The Flight Center Inc. several weeks or about a month prior to the accident. He held a commercial pilot certificate with single-engine and multiengine land ratings and an instrument airplane rating. He also held a flight instructor certificate with airplane single-engine land and instrument airplane ratings. At the time of the accident he accumulated a total flight time of 346.4 hours in all aircraft of which 4.4 hours were in the accident airplane make and model. Prior to being hired by the company, the CFI accumulated about one hour total flight time in Cessna 150 series airplanes when he received spin training at the University of Illinois. During his employment with the company, he had flown the accident airplane twice for a total of about two hours, both times with students during local instructional flights. The CFI stated that he received about 5 hours of company training that was comprised of flights with the chief flight instructor and two other company CFIs. He stated that he had to pay the company for the airplane rental and company instructors used in his training. The company training did not include a written exam and the check out of airplane systems was described only during the preflight inspection of the airplane. He did not receive any Cessna 150 flight or ground training; all of the check out training was performed in the company's Beech Sundowner airplanes. The 1973 Cessna 150L, serial number 15075273, airplane was powered by a Continental O200-A, serial number 204906-9-A, engine. The airplane was registered to The Flight Center Inc. on May 31, 1955. The airframe accumulated a total time of 7,412.6 hours and the engine accumulated a total time since major overhaul of 2,413.7 hours. According to Teledyne Continental Service Information Letter SIL98-9A, Time Between [Major] Overhaul Periods, lists the O-200-A engine overhaul as at least every twelve years, or on an accumulation of 1,800 hours. The Cessna 150 Owner's Manual lists the maximum glide speed as 70 MPH indicated airspeed. The airplane was equipped with two standard fuel tanks with a total fuel volume is 26.0 gallons (13 gallons each) and the total usable fuel is 22.5 gallons. The cruise fuel consumption rates listed in the owner's manual are based upon a lean mixture setting. There is no fuel consumption data listed for taxi, takeoff, and landing in the owner's manual. The owner's manual lists the following fuel consumption rates for the following altitudes and engine rpm: At 2,500 feet: - 2,750 rpm, 7.0 gallons per hour - 2,700 rpm, 6.6 gallons per hour - 2,600 rpm, 5.8 gallons per hour - 2,500 rpm, 5.1 gallons per hour - 2,400 rpm, 4.6 gallons per hour - 2,300 rpm, 4.1 gallons per hour At 5,000 feet: - 2,750 rpm, 6.4 gallons per hour - 2,700 rpm, 6.0 gallons per hour - 2,600 rpm, 5.3 gallons per hour - 2,500 rpm, 4.8 gallons per hour - 2,400 rpm, 4.3 gallons per hour - 2,300 rpm, 3.8 gallons per hour Federal Aviation Administration (FAA) Accident Prevention Program publication, "Time in Your Tanks - FAA-P-8740-3, " paragraph 1e. states, "Multiply the usable fuel on board your aircraft by 75 percent and divide the result by your previously confirmed consumption rate. This will be your SAFE FLIGHT limit for the aircraft. Resolve never to exceed it." Examination of the airplane by an FAA inspector revealed that there was no usable fuel in either wing fuel tank, there was no fuel in the fuel line leading to the engine driven fuel pump, and there was "minimal" fuel in the carburetor. The mixture control was in the full rich position, the throttle was in the full forward position, the carburetor heat was in the off position, the fuel selector was in the off position. A first respondent reported that the airplane strobe light was illuminating upon his arrival. The Investigator-In-Charge asked the CFI if he knew under what conditions the fuel gauges on small airplanes were accurate and whether he had knowledge of Federal Aviation Administration publication Time In Your Tanks. He said that he was unaware of the conditions of when the fuel gauges would be accurate and "never heard of" Time In Your Tanks and did not know how to calculate the "safe flight time" cited in the publication. The CFI said that the maximum glide speed was "76 or 70 something" and did not know the exact V-speeds but they were similar to the Beech Sundowner. The CFI said that daylight conditions prevailed when he visually checked the fuel tanks at PWK and night conditions prevailed when he visually checked the fuel tanks with a flashlight at DLL.
A loss of engine power due to fuel exhaustion during approach, inadequate preflight planning/preparation by the certified flight instruction (CFI), and the unsuitable terrain encountered by the CFI during the forced landing. An additional cause was the improper training of the CFI by the company. Contributing factors were the lack of familiarity with the airplane by the CFI and the night light conditions.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
