Peoria, AZ, USA
N2054T
Schweizer SGS2-33A
The student pilot reacted to an unusual noise, released from the tow plane immediately after liftoff, and the glider collided with a cactus. This was the first flight of the day for the glider and the pilot. He preflighted the glider, and noted no anomalies. The tow started from the normal point about midway down runway 23L. About 10 feet in the air, the pilot heard a metallic flapping sound. Believing that it might be a structural problem, he released from the tow. While the pilot was looking for a place to land, the glider hit the ground and bounced. The glider then hit a cactus plant about 1,200 feet from the runway, and the pilot lost control. It hit a second cactus with the right wing. The glider spun around, and collided with terrain resulting in substantial damage. Post flight examination revealed a loose wing root gap cover fairing. A ground witness observed the fairing come loose during the takeoff ground roll. An instructor who flew this glider the previous week reported that the fairing checked good on preflight, but came loose in flight. The instructor said the glider's handling characteristics were not affected by the loose fairing and he landed uneventfully.
This report is based on information received by the National Transportation Safety Board (NTSB). Additional details may be found in the NTSB's public docket for this case. For further information, please contact the NTSB Office of Public Inquiries.
the pilot's encounter with obstacles and unsuitable terrain in the landing area during the pilot's attempted precautionary landing. A factor in the accident was the loose wing root gap seal fairing.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
