Albuquerque, NM, USA
N9019A
Adams A55S
As the balloon drifted south and approached Interstate Highway 40, the southerly wind of about 5 knots increased in velocity and the pilot decided to land. He saw an open field and made his landing approach. A "strong wind shear drove the balloon into the ground." During the ground impact, the envelope contacted power lines, causing several panels to sustain burn damage and thermally severed 7 of the16 suspension cables.
On October 15, 2006, approximately 0850 mountain daylight time, an Adams A55S balloon, N9019A, piloted by a commercial pilot, was substantially damaged when the it struck power lines during descent at Albuquerque, New Mexico. Visual meteorological conditions prevailed at the time of the accident. The personal flight was being conducted under the provisions of Title 14 Code of Federal Regulations Part 91 without a flight plan. The pilot was not injured but two passengers received minor injuries. The local flight originated from the Albuquerque Balloon Festival Park approximately 0815. According to the pilot's accident report and the statement he gave FAA inspectors, the balloon was drifting south and approaching Interstate Highway 40. The southerly wind of about 5 knots increased in velocity and the pilot decided to land. He saw an open field and made his landing approach. A "strong wind shear drove the balloon into the ground." The balloon contacted the power lines, grounding them and causing a power loss. Although no load tapes were damaged, several panels in the envelope below the equator had burn holes. In addition, 7 of 16 suspension cables were thermally severed.
the pilot's improper in-flight planning/decision. A contributing factor was the unfavorable wind.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
