Heber, UT, USA
N98FC
Cessna 180G
The pilot said that he obtained the landing weather conditions from the local Automated Weather Observing System as he approached the airport. The winds were reported to be 290 degrees at 9 knots. He entered the traffic pattern for runway 21, and executed two low approaches before making a three-point full stop landing. During the landing rollout, he lost directional control and the airplane ground looped to the right. Subsequently the left main landing gear was bent inward, the outer approximate 3.5 feet of the left wing and aileron were bent up approximately 30 degrees, and the left elevator was scrapped and wrinkled.
The pilot said that as he approached the airport, he obtained the landing weather conditions from the local Automated Weather Observing System. The winds were reported to be 290 degrees at 9 knots. He entered the traffic pattern for runway 21, and executed two low approaches before making a three-point full stop landing. During the landing rollout, he lost directional control and the airplane ground looped to the right. Subsequently the left main landing gear was bent inward, the outer approximate 3.5 feet of the left wing and aileron were bent up approximately 30 degrees, and the left elevator was scrapped and wrinkled.
The pilot's inadequate compensation for the crosswind condition and failure to maintain directional control. Contributing to the accident was the crosswind weather conditions.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
