Forrest City, AR, USA
N198LA
AIR TRACTOR INC AT-502
After making an agricultural application, the pilot made a climbing left turn; the airplane then began vibrating and shaking. The pilot was able to return the airplane to level flight, but it rocked left and right, with the left aileron going up and down from stop to stop. The pilot chose to perform an emergency landing in a field next to an airport. A postaccident examination of the airplane revealed that the two aileron push-pull rod bolts were missing. The bolts and associated hardware were not located among the wreckage. The airplane had undergone extensive maintenance about 5 months before the accident. A review of the airplane's maintenance manual revealed that the nuts installed in the airplane control system are self-locking nuts, which can loosen if insufficient torque is applied to them. It is likely that maintenance personnel applied improper torque to the aileron's push-pull rod self-locking nuts, which resulted in the eventual loosening of the nuts and the separation of the left aileron's push-pull rod and hardware.
On February 7, 2013, about 1600 central standard time, an Air Tractor AT-502 airplane, N198LA, collided with terrain during a landing near Forrest City, Arkansas. The commercial rated pilot was injured and the airplane was substantially damaged. The airplane was registered to and operated by South Delta Aviation, LLC, West Helena, Arkansas, under the provisions of 14 Code of Federal Regulations Part 91 as a maintenance test flight. Visual meteorological conditions prevailed for the flight that operated without a flight plan. The pilot reported that he departed with 150 gallons of water to calibrate the spray system on the airplane. After making a spray pass, he started a climbing turn to the left; the airplane then began vibrating and shaking. The pilot added that he managed to get the airplane straight and level, but still rocked left and right. He further added that the left aileron was going up and down; stop to stop. The pilot found that as he slowed the airplane to 90 mph, he would lose aileron control and the airplane would start a slow left turn while rocking back and forth. The pilot then performed a long circle and selected a hay field, next to the airport for the emergency off-field landing. According to the responding Federal Aviation Administration (FAA) inspector, the airplane was substantially damaged during the accident. Additionally, inspection of the airplane revealed that the two bolts in the aileron push-pull rod were missing. The bolts and associated hardware were not located among the wreckage. The inspector also noted that the airplane had undergone extensive maintenance, about five months before the accident. A review of the airplane's maintenance manual revealed that the nuts installed in the airplane control system are self-locking nuts.
The in-flight separation of the left aileron's push-pull rod and hardware. Contributing to the accident was the failure of maintenance personnel to apply proper torque to the self-locking nuts.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
