St. Louis, MO, USA
N360SW
BOEING 737 3H4
On December 23, 2013, at approximately 1615 central standard time a Boeing 737-344, registration number N360SW, operated by SWA as flight 1091, and powered by two CFM56-3 turbofan engines, experienced a bird strike and ingestion on the No. 2 or right-hand engine (RHE) after takeoff from Lambert-St. Louis International Airport (STL), Missouri. As the airplane climbed through 1,700 feet, it impacted multiple birds causing damage to the RHE and wing. The pilot declared an emergency and returned to STL for an uneventful landing. There were no injuries reported to the 110 passengers, 2 flight crew and 3 flight attendants. The incident flight was a 14 CFR Part 121 domestic passenger flight from STL to Kansas City International Airport, Kansas City, Missouri (MCI). Day visual meteorological conditions prevailed at the time and an instrument flight rules flight plan was filed. Examination of the airplane revealed no damage to the fuselage. Examination of the engine revealed no penetration or breaches of the cases; however, the fan case exhibited several bulges that corresponded to hard impacts and missing fan blade rub strip material exposing the parent material below. Examination of the RHE revealed that all the fan blades were extensively damaged exhibiting hard-body impact damage with significant material loss along the length of the leading edge. Two adjacent fan blades were fractured transversely across the airfoil near the one-third span, and exhibited leading edge soft-body impact damage. The remains of the two birds were identified as one male and one female mallard duck. The average weight of the male mallard is 1246 grams or 2.75 pounds; the average weight of the female mallard is 1095 grams or 2.4 pounds. Comparing the airplane and engine damage to the requirements for bird ingestion and engine debris containment at the time the engine and airplane were both certificated revealed that the engine complied with the bird ingestion and containment requirements set forth in Parts 33.77 and 33.19 and the airplane complied with the containment requirements set forth in Parts 25.903.
HISTORY OF FLIGHT On December 23, 2013, at approximately 1615 central standard time a Boeing 737-344, registration number N360SW, operated by SWA as flight 1091, and powered by two CFM56-3 turbofan engines, experienced a bird strike and ingestion on the No. 2 or right-hand engine (RHE) after takeoff from Lambert-St. Louis International Airport (STL), Missouri. As the airplane climbed through 1,700 feet, it impacted multiple birds causing damage to the RHE and wing. The pilot declared an emergency and returned to STL for an uneventful landing. There were no injuries reported to the 110 passengers, 2 flight crew and 3 flight attendants. The incident flight was a 14 CFR Part 121 domestic passenger flight from STL to Kansas City International Airport, Kansas City, Missouri (MCI). Day visual meteorological conditions prevailed at the time and an instrument flight rules flight plan was filed. ENGINE AND NACELLE DAMAGE EXAMINATION On site examination of the airplane revealed a hole in the leading edge of the wing with its immediate surroundings splattered with red colored organic debris. The inner barrel of the RHE inlet cowl exhibited multiple impacts, gouges, and through-holes. There was no evidence of fuel or oil leaks from the engine. The engine and nacelle were removed from the airplane and sent to the Southwest Airlines Maintenance Training Building in Dallas, Texas for detailed examination. Examination of the nacelle revealed that the inlet nose cowl had a dent at 5:30 o'clock location on the outer surface of the inlet lip, approximately 8 inches x 4 inches x 0.5 inches deep. The inlet inner barrel had multiple small punctures on the inner skin (airflow) side and two large thru-holes; the one at 2:30 o'clock location was approximately 3 inches x 2 inches in size and the other at 3:00 o'clock was approximately 5 inches x 4 inches in size. One fan blade fragment penetrated the outer skin of the inlet at the 3 o'clock location, creating a 7-inch long tear, in the shape of a fan blade chord, consistent with a piece of fan blade passing thru edgewise. The exiting direction of the uncontained fan blade particle was outboard, causing no damage to the fuselage. Examination of the RHE revealed that all the fan blades were extensively damaged with two adjacent engine fan blades fractured transversely across the airfoil below the mid span shrouds. No penetration or breaches were observed in any of the engine cases, but the fan case exhibited several bulges that corresponded to hard impacts and missing fan blade rub strip material exposing the parent material below. TESTS AND RESEARCH A United States Department of Agriculture Wildlife Biologist collected tissue and feathers from the leading edge of the wing and sent them to the Smithsonian Institution National Museum of Natural History Division of Birds - Feather Identification Laboratory in Washington, D.C. for analysis. The analysis of the remains identified it as both male and female mallard ducks. The average weight of the male mallard is 1246 grams or 2.75 pounds; the average weight of the female mallard is 1095 grams or 2.4 pounds. No damage to the fuselage was reported. ADDITIONAL INFORMATION Bird Ingestion Requirements The CFM56-3 was certified under Part 33, effective February 1, 1965, with Amendments 33-1 through 33-6. The bird ingestion requirement at that time in Part 33.77 Foreign Object Ingestion was for a 4-pound bird. Under Part 33.77, the ingestion of a 4-pound bird that may not cause the engine to - i Catch Fire; ii. Burst (penetrate its case); iii. Generate loads greater than those specified in Part 33.23; or iv. Loss of capability of being shut down. Examination of the engine revealed that the engine did not catch fire, there were no engine case penetrations, the pilot was able to shutdown the engine normally, and the calculated imbalance loads based on the loss of fan blade material were less than those the engine was certified. Engine and Airplane Containment Requirements The engine containment standards are found in Part 33.19 Durability, and require engine manufacturers to design compressor and turbine rotor cases that must provide for the containment of damage from rotor blade failure. Examination of the engine revealed that the fan case sustained some bulging but no exit holes, penetrations, or uncontainments were noted. No containment requirements exist that call for airplane manufacturers to design inlets or nacelles to contain engine debris. Therefore, the requirement for containment of fan blades stops are the interface between the engine structure and the airplane inlet structure. Although the airplane manufacturers are not required to design structure to contain engine debris, they are responsible for the overall safety of the airplane and do have some engine debris uncontainment responsibility. Engine debris containment requirements for transport category airplanes are addressed in Part 25.903 Engines subsection (d)(1) and require airplane manufacturers to incorporate design precautions to minimize the hazards to the airplane in the event of an engine rotor failure or of a fire originating inside the engine which burns through the engine case. FAA Advisory Circular (AC) 20-128A, "Design Considerations for Minimizing Hazards Caused by Uncontained Turbine Engine and Auxiliary Power Unit Rotor Failure" describes how to best mitigate the threat of the debris causing a potential hazardous or catastrophic condition to the airplane or harm to the occupants on board by requiring design precautions based on service experience and tests. Examination of the airplane revealed minor superficial gouging of the fuselage, the left-hand wing, and one passenger window, none of which posed a hazard to the airplane or passengers.
The initial damage to the fan blades was caused by the ingestion of two mallard ducks that caused one or more fan blades to fracture, striking the fan shroud, as well as other passing fan blades, producing various sized blades fragments that created a cascading effect of collateral impact damage to the other fan blades, the fan case, and the inlet cowl. One large blade fragment was deflected out of the fan containment plane, which pierced and exited the inlet cowl in a benign direction. The engine and airplane met the applicable bird and containment design standards since the engine did not catch on fire, no engine cases exhibited any penetrations, the engine was able to be shutdown normally, and the airplane damage did not impact the safe operation of the airplane or create a hazard to the persons on board.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
