Hope, AR, USA
N525AG
GERALD NELSON NELSON WOODY
The private pilot was conducting touch-and-go landings in the homebuilt, tailwheel-equipped, experimental airplane. After a normal touchdown, the airplane veered to the left off the asphalt runway surface and ground looped as it departed the runway, which resulted in substantial damage to the fuselage and left wing. Postaccident examination revealed that the left main landing gear retaining mechanism was broken, but it was not clear if the damage occurred before or after the loss of control. The pilot, who was the builder of the airplane and had about 500 hours of flight time in the airplane, reported that he believed that the retaining mechanism could have broken upon landing and resulted in the ground loop. The winds were light and variable at the time of the accident. Because the damage to the landing gear retention mechanism could have occurred before or after the loss of control, the reason for the loss of control could not be determined.
On July 18, 2016, about 0930 central standard time, a Nelson Woody homebuilt, tailwheel-equipped, experimental airplane, N525AG, registered to the pilot, sustained substantial damage after veering off the runway during landing rollout at the Hope Municipal Airport (M18), Hope, Arkansas. The private pilot sustained serious injuries and one passenger sustained minor injuries. The personal flight was being conducted under the provisions of Federal Code of Regulations Part 91. Visual meteorological conditions prevailed throughout the vicinity and a flight plan was not filed. The flight originated from M18 about 0900. According to the pilot, he was conducting touch and go landings at M18 on runway 16. Upon a normal touchdown, the aircraft veered to the left off the runway surface. There were ground impressions of the left wingtip and propeller marks on the ground. Evidence showed that the airplane ground looped as it departed the runway. Both occupants exited the aircraft and the pilot was transported to a local hospital for his injuries. Examination of the airplane by an FAA inspector after the accident revealed that the left wing was bent downward mid-span about 90-degrees, and the fuselage was buckled. The left main landing gear retaining mechanism was found broken. It was not clear if the damage was pre or post impact. The pilot, who was the builder of the airplane and had about 500 hours of flight time in the airplane, reported that he believed that the retaining mechanism could have broken upon landing resulting in the ground loop. The nearest weather reporting station, located in Texarkana, Arkansas, about 30 miles from the accident site, reported clear skies and variable winds at 4 knots. Local personnel located at the airport reported that it was a nice day with light winds on the day of the accident.
The loss of control upon landing for reasons that could not be determined.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
